B-52 Stealth LG-100A - User Manual

1

Summary

Important Safety Information

General Safety Precautions

Lists essential instructions for safe operation, handling, and placement of the LG-100A amplifier to prevent hazards.

Getting to Know Your LG-100 A: Front Panel Controls

Input and Overdrive Controls

Details controls for guitar input, distortion gain (Gain 1, Gain 2), contour, and channel selection for the overdrive channel.

Overdrive Channel EQ and Level

Explains the Bass, Middle, and Treble equalization controls and the Level adjustment for the overdrive channel.

Getting to Know Your LG-100 A: Clean Channel Controls

Clean Channel Selection and Level

Describes the channel selection switch and level control for the clean channel of the amplifier.

Clean Channel EQ and Effects

Details the Bass, Middle, and Treble equalization, Reverb, and Master controls for the clean channel.

Headphone and Power Controls

Covers the headphone jack for private listening and the main power switch for the amplifier.

Rear Panel Connections and Features

Power and Grounding

Details the AC inlet for power connection and the ground-lift switch for hum reduction.

Speaker and Line Outputs

Explains the external speaker jacks and the line out jack for connecting to other audio devices.

Footswitch and Effects Loop

Covers the footswitch jack and the effects send/return jacks for integrating external effects units.

Amplifier Features and Specifications

Key Features List

Highlights the main capabilities of the LG-100A amplifier, including power output, input types, and channel controls.

Technical Specifications

Provides detailed technical data such as output power, impedance, input levels, and physical dimensions.

Warranty and Return Procedures

Product Warranty Terms

Outlines the warranty coverage for B-52 amplifiers and cabinets, including duration and limitations.

Return and Safety Notification

Explains procedures for returning defective products and the importance of product registration for safety alerts.

B-52 Stealth LG-100A Specifications

Power Output

output power at 8 ohms	100 Watts RMS
output power at 4 ohms	120 Watts RMS

Input Specifications

input impedance	500K Ohms
maximum input level	-45 dB
optimum input level	-8 dB

Output Specifications

nominal output level	-8 dB
line out	0 dB / 1V RMS
phones output	60 mW into 8 Ohm

Power Consumption

power consumption	160 Watts

Signal to Noise Ratio

s/n ratio	Greater Than 100 dB

Effects

effects send load impedance	1K Ohm or Greater
effects return impedance	100K Ohms
equalization bass	+/- 15 dB at 50 Hz

Equalization

equalization middle	+/- 10 dB at 600 Hz
equalization treble	+/- 18 dB at 3 KHz
equalization bass	+/- 15 dB at 50 Hz

Weight and Dimensions

dimensions	24.5” (W) x 11” (D) x 10” (H)
weight	35 lbs