Need help?Do you have a question about the B-52 ST-100A and is the answer not in the manual?
Description of Power ON/OFF and Standby ON/OFF switches for amplifier operation.
Connection for headphones to the ST-100A, also serves as input.
Controls the overall signal level and volume of the ST-100A.
Treble, Middle, and Bass controls for the Clean Channel.
Controls the overall signal level of the Clean Channel.
Connects ST-100A to external line-level devices and controls output capacity.
Connects to external effects units for sending and returning signals.
Connects footswitch for channel, gain, and reverb control.
Connects to external loudspeakers with appropriate impedance matching.
Removes ground from the circuit to eliminate 60-cycle hum.
Selects between Solid-State, Tube AB1, and Tube A rectifier types.
Connects AC powercord and contains the primary fuse.
Instructions for returning defective products for warranty replacement or repair.
Limitation of liability for damages arising from product use.
Contact information and support for B-52 warranty and product questions.
General| Inputs | 1 x 1/4" Instrument Input |
|---|---|
| Effects | Reverb |
| Power Output | 100 Watts |
| Channels | 2 Channels (Clean, Overdrive) |
| Controls | Bass, Mid, Treble, Reverb |
| Outputs | Line Out |
| Speaker Size | N/A (Head Only) |
To Next Page
