Need help?Do you have a question about the B-band A3.2 and is the answer not in the manual?
Important safety and product warnings to consider before installation or use.
Key factors regarding UST installation, saddle fit, and string angle.
Guidelines for correctly installing the AST transducer on various guitar bracing.
How to connect transducer and battery cables to the preamp connectors.
Installing the preamp assembly and securing the front plate with screws.
Preparing and test-fitting the endpin jack into the guitar's strap button hole.
Tightening the endpin jack securely and installing the strap attachment.
Connecting the 9-volt battery and securing its wires with clamps.
Procedure for threading and seating the UST transducer in the saddle slot.
Installing the 1470 AST on steel string guitars using the guide.
Installing the 1470 AST on classical guitars by hand.
How to test the installed system by tapping and shaking the guitar.
Adjusting the UST input gain trim on the A2.2 preamp.
Adjusting input gain trim pots on the A4.2 preamp.
Steps to take when no sound is produced by the system.
Diagnosing and fixing loud hum or buzzing issues in the system.
Troubleshooting steps for resonance or distortion issues with the UST.
Addressing problems where strings have uneven volume output.
General| Brand | B-band |
|---|---|
| Model | A3.2 |
| Category | Transducer |
| Language | English |
To Next Page