B.F.C. Lira - User Manual

To Next Page

ISTRUZIONI SMONTAGGIO PANNELLO LATERALE LIRA

INSTRUCTION TO DISMANTLE THE LIRA SIDE PANELS

INSTRUCTIONS POUR LE DÉMONTAGE DU PANNEAU LATÉRAL LIRA

ANWEISUNGEN, DIE LIRA-SEITE-TAFELN ZU DEMONTIEREN

Fase 1

Phase 1

Smontaggio

Dismantlement

Demontage

Abbruch

Svitare e togliere le 2 viti superiori e la vite inferiore di fissaggio del pannello laterale.

To unscrew and to remove the 2 upper screws and the fixing side panel lower screw.

Dévisser et enlever les 2 vis supérieures et la vis inférieure de fixage du panneau latéral.

Mich losschrauben zu lassen und die 2 oberen Schrauben und die Befestigen-Seite-Tafel zu

entfernen, senken Schraube.

Pagina 1 di 2

Need help?

Do you have a question about the B.F.C. Lira and is the answer not in the manual?

Summary

Unscrew and remove the two upper screws and the lower fixing screw.

Start to remove the side panel by beginning from the upper part.

Complete the dismantling by moving the side panel downwards.

Bring the side panel to the machine, starting from the lower rear part.

Continue aligning the panel with the upper rear part.

Continue aligning the panel with the lower front part.

Finish aligning the panel with the upper front part.

Press the panel centrally to hook it to the frame bracket.

Push the back part of the panel to complete the hookup to the frame bracket.

Complete the fixing by screwing the two upper screws and the lower screw.

General