What to do if B meters Measuring Instruments shows error 18 or 19?
If your B meters Measuring Instruments consistently displays error codes 18 or 19, this may indicate damaged temperature probes or that the system temperatures are outside of acceptable limits. In such cases, inform Customer Service.
What to do if B meters HYDROCAL-M4 shows error 12?
If your B meters Measuring Instruments consistently displays error code 12, it likely indicates damaged temperature probes. In such cases, inform Customer Service.
What to do if B meters Measuring Instruments is not accounting for consumption?
If the B meters Measuring Instruments is not accounting for consumption, it could be due to tampering, strong external shocks, or damage to the flow detection sensor. In such cases, inform Customer Service.
What to do if the electronic unit of B meters Measuring Instruments is open and visible?
If the electronic unit of your B meters Measuring Instruments is open and visible, it suggests tampering or strong external impacts. In such cases, inform Customer Service.
What to do if the lower case brass separated by electronic unit in B meters HYDROCAL-M4?
If the lower brass case of your B meters Measuring Instruments has separated from the electronic unit, it suggests tampering or strong external impacts. In such cases, inform Customer Service.
What to do if B meters HYDROCAL-M4 Measuring Instruments has a damaged brass case or leakage?
If the brass case of your B meters Measuring Instruments is damaged or leaking, it may be the result of an external impact or fall. In such cases, inform Customer Service.
How to fix a B meters HYDROCAL-M4 with display off and unresponsive buttons?
If the display of your B meters Measuring Instruments is off and the buttons are unresponsive, the battery may be damaged or discharged. In such cases, inform Customer Service.
What to do if no consumption is accounted for in B meters HYDROCAL-M4?
If no consumption is being accounted for by your B meters Measuring Instruments, it may be due to tampering, strong external shocks, or damage to the flow detection sensor. In such cases, you should inform Customer Service.
General| Protection class | IP68 |
|---|---|
| Maximum operating pressure | 1.6 MPa |
| Communication | M-Bus |
| Power supply | Battery |
| Dimensions | Depends on nominal diameter |
| Weight | Depends on nominal diameter |
To Next Page
