Need help?Do you have a question about the B-Qtech BQ-D9004 series and is the answer not in the manual?
General| Video Compression | H.264 |
|---|---|
| Motion Detection | Yes |
| Video Input | 4 channels |
| Video Output | 1 channel |
| Audio Input | 4 channels |
| Audio Output | 1 channel |
| Hard Drive | 1 SATA HDD |
| Network Connectivity | Ethernet (RJ-45) |
| Mobile Access | Support iPhone, Android |
| Operating Temperature | -10°C to +55°C |
| Power Supply | DC 12V |
Use only specified voltage power sources; avoid overvoltage.
Never insert metallic objects into the DVR case to prevent shock.
Operate in dry conditions, away from water and dust.
Do not remove the top cover to avoid severe electrical shock.
Supports real-time surveillance via monitor.
Save recordings to HDD and backup via external storage.
Play back recordings and access remotely via network.
Overview of the 4-channel front panel buttons and indicators.
Overview of the 8-channel front panel buttons and indicators.
Details ports for video, audio, LAN, VGA, RS485, etc.
Details ports for video, audio, LAN, VGA, RS485, etc.
Detailed guide on using mouse clicks and movements for navigation and selection.
Step-by-step instructions for installing the HDD.
Connecting cameras and monitors to the DVR.
How to connect the power adapter.
Steps for booting up and initializing the DVR system.
Understanding and using the main interface for live display.
Configuring channel display, brightness, contrast, and hue.
Setting up recording modes, quality, and schedules.
Initial steps for network setup (DHCP, PPPoE, Static).
Configuring DHCP, PPPoE, Static IP, and DDNS for access.
To Next Page