GB
- 7 -
Pairing Procedure
Your B-Speech® ISAS needs to be paired to your
Bluetooth® mobile phone before it can be used. This is a
two part process; one part is carried out on the headset and
the other is carried out on the mobile phone.
Note: Different mobile phones use a different method to go
through the pairing process.
To pair your B-Speech ISAS:
1.With your headset turned off, press and hold the
Multifunction key 7 sec. The LED will alternate rapidly
between blue and red, which indicates that the headset is
in pairingmode.
2. Use your phone's menu to search for Bluetooth® audio
devices. The phone should indicate it has found the
B-Speech® ISAS headset. Confirm that you want to
pair your mobile phone and headset together. If you are
unsure how to go through the pairing process on your
mobile phone, please consult its user manual.
3. When asked for a pin key, enter: "0000". Your phone will
confirm that pairing has been successful.
Note: There is usually a time limit to pair devices,
To Next Page
Loading...