B-TEK Scales DD700 - User Manual

To Next Page

Page | 1

DD700 Technician’s Service

Manual

BTEK

September

2023

This guide is intended to supplement and simplify other product technical manuals. The focus is to instruct on setting

up / troubleshooting the scale and communication ports on a DD700 indicator. See Use, Maintenance, and

Installation manual, Installation Manual, or Advanced User Manual for overall product information.

Distribution without consent of B-TEK scales, LLC is prohibited, for use by Heavy Capacity dealers only.

Main Page

Table of Contents2
Main Screen5
Scale Metrological Seal6
- Sealing6
- Access All Parameters6
- Access Non Metrological Parameters6
Legal for Trade Scale Information7
Printer and Remote Display Wiring8
Digital Scale Wiring9
- Digital Junction Board9
Analog Scale Connection10
Serial Connections10
- COM2 Serial Link10
  - Com111
- RS232 / RS422 / RS485 Installation Guidance12
  - RS422 Connections12
  - RS485 Connections12
Inputs / Outputs13
- Input Connection13
- Output Connection13
Accessing Scale Configuration14
Configuring Scale15
Scale General Operation Configuration16
Digital Scale Parameters17
- Digital Scale - Angular Calibration - Address Load Cells18
Manually Adjusting Angular Coefficients19
Calibrating Zero-Span for Analog and Digital Scale20
Error Codes21
- Scale Errors21
- Scale Error Fault Codes and Remedies22
Diagnostics23
- How the User Level Diagnostics Function23
- User Level Diagnostics Function, Explanation of Error Symbols24
- Test Menu for Scale Diagnostics (in #1 Scales, Not #3 Terminal Test)25
Digital Scale Input Troubleshooting26
Replacing One or Two Digital Load Cells28
Replacing Indicator - Uploading from Cells29
- Simulating a Weight While Maintaining the Calibration with Digital Simulator29
Test Digital Cells - Cell Emergency Routine30
Configuring Operating Mode31
Configuring Database Files32
RCD / RCD ID File Reset Procedure33
Configuring Printer34
Serial Output Config. (Remote / Computer)35
Print Net Tons on Standard Ticket36
Modifying Messages / Print Text38
Advanced Ticket Formatting - Dialogic39
Configuring Inputs and Outputs - Setpoints44
Configuring Remote Zero Input45
Setting Time and Date46
Inbound / Outbound Weighing47
Weighing with Stored Truck Tares48
Changing Scale Type / Set up Repeater49
- Set up Repeater Continued50
Axle Weighing and Totalizing Setup51
TCP/IP Ethernet Output Configuration52
4-20 Ma Option Card Setup and Calibration54
Bypassing the On-Off Switch (Always On)55
Memory Recovery Procedure56
Firmware Update57
- Firmware Update Continued58
- Firmware Update Continued59
- Firmware Update Continued60

Need help?

Do you have a question about the B-TEK Scales DD700 and is the answer not in the manual?

B-TEK Scales DD700 Specifications

General

Brand	B-TEK Scales
Model	DD700
Category	Network Card
Language	English

B-TEK Scales DD700 - User Manual

Table of Contents

B-TEK Scales DD700 Specifications