14
11. TROUBLESHOOTING
Contact an authorized Customer Service Centre in case you need help about the use and
the maintenance of the equipment.
In case of any malfunction look at the table and try to eliminate it.
Problems Solutions
The device
does not
switch on
• Make sure the power plug is firmly fitted to the wall socket.
• Make sure that the device has been operating within operating
limits indicated in this Instruction for Use (30 min ON / 30 min OFF).
• Make sure that the ends of the air tube are tightly fitted to the main
unit and nebulizer.
• Verify that the nebulizer is not empty or has been filled with the
proper quantity of medicine (max 8 ml). Verify that the nebulizer
nozzle is not obstructed.
The device
does not
nebulize or
nebulizes
weakly
In case of the device not start working properly again, address to authorities Service
center.
Maintenance and repairs
In case of failure, address to qualified personnel authorized by B.Well. Do not open the
device in any case. The unit has no user-serviceable parts within and does not need
internal maintenance or lubrication.
12. SPECIFICATIONS
Power supply: 230 V ~ 50 Hz, 1А
Maximum filling volume: 8 ml
Minimum filling volume: 2 ml
Particle size (MMAD): approx. 3,16 μm
% of particle size <5 μm - more than 70 %
Nebulization rate: 0,4 ml/min.
Residual medicine volume: 1 ml
Noise level: 54 dBA
Weight PRO-110: 1,345 Kg (without accessories)
1, 562 кг (in the gift box with accessories)
Weight PRO-115: 1,510 Kg (without accessories)
1,786 кг. (in the gift box with accessories)
Maximum pressure: 2,2 bar
Size PRO-110 : 137 x 173 x 96mm
Size PRO-115: 224 x 112 x 170 mm
Operation limits: 30 min ON / 30 min OFF
Operating conditions: Temperature: MIN +10 °C - MAX +40 °C
Humidity: MIN 10% RH - MAX 95% RH
Atmospheric pressure: 700 hPa – 1060 hPa
Storage conditions: Temperature: MIN -25 °C – MAX +70 °C
Humidity: MIN 10% RH – MAX 95% RH
Atmospheric pressure: 700 hPa – 1060 hPa
IM_PRO-110_PRO-115_EN_RO_BG_2916.indd 14 21.07.2016 11:39:03
To Next Page
Loading...
