NederlandsFrançais Deutsch English
Instruction manual Rain tent
7
Step 2:
Attaching the canvas
The order of assembly is essential for an optimum fit:
1. Unfold the tent canvas and unzip all zips
2. Place the canvas over the poles: the broad side on the sides and the narrow side with the clips (for the
handlebar) at the side of the handlebar. Make sure the poles are placed correctly in the sleeves of the
canvas
3. Pull the canvas downwards and close all zips
4. Feed the ends of the tie down straps through the corners and tighten slightly (A)
5. Is the tent in place? Tighten all tie down straps so the tent is secure
Step 3:
Opening the windows
Would you like to cycle with open windows? Fold the windows carefully and attach to the hook on the top of the
rain tent using the elastic band.
TIP: A sunroof is also available for use in combination with the poles of the rain tent.
To Next Page
Loading...
