Baby Applesseed Davenport User Manual

PAGE 10
DAVENPORT CRIB ASSEMBLY MANUAL • ©2014 Baby Appleseed
®
•Warning: Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings
or pacifier cords. Do not suspend strings over a crib or attach strings to toys.
•DO NOT place a crib near a window where cords from blinds or drapes may strangle a child.
•Keep wall decorations, especially those with strings, completely out of a child’s reach.
•Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or sharp edges. DO NOT
use the crib if any parts are missing or broken. Ask your dealer or contact manufacturer for replacement parts and
instructional literature if needed. DO NOT substitute parts.
•Check fasteners periodically for tightness. Do not overtighten. This may cause distortion or breakage.
•When a child is able to climb out, reaches the height of 35 in. (89cm) or when the height of the side rail is less than 3/4
of the child’s height, the crib shall no longer be used.
•DO NOT use a water mattress with this crib. •If refinishing, use a non-toxic finish specified for children’s products.
•When a child is able to pull to a standing position, set the mattress to the lowest position and remove bumper pads, large
toys and other objects that could serve as steps for climbing out.
•Never use plastic shipping bags or other plastic films as mattress covers because they can cause suffocation.
•Do not tie pacifiers, necklaces, or any other items around a child’s neck or on crib parts. This could cause strangulation.
•Use a crib as a crib, not as a play pen. Remember that a crib is not a substitute for a parent’s supervision.
•Parents should ensure a safe environment for their child by checking the crib regularly before placing the child in the
product. Please make sure that every component is properly and securely in place.
•Infants can suffocate in gaps between crib sides and a mattress too small.
•To help prevent strangulation, tighten all fasteners. A child can trap parts of body or clothing on loose fasteners.
•To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless
otherwise advised by your physician.
Failure to follow these warnings and assembly
instructions could result in serious injury or death.
WARNING:
Infants can suffocate on soft bedding.
•NEVER add a pillow, comforter or padding.
•NEVER place additional padding under an infant.
WARNING:
Read all instructions before assembling crib. Follow all product
warnings on crib. Keep the manual in the sleeve provided for future use.
Caution: Any mattress used in this crib must be at least 27 1/4 in by
51 5/8 in (69 cm x 131 cm) with a thickness not exceeding 6 in (15 cm).
•This crib is to be assembled by an adult•

Baby Applesseed Davenport Specifications

General

Brand	Baby Applesseed
Model	Davenport
Category	Indoor Furnishing
Language	English

Summary

General Safety and Usage Warnings

Critical Assembly and Usage Warnings

Essential warnings for assembly and use to prevent serious injury or death, including strangulation and suffocation.

Mattress and Assembly Requirements

Specifies required mattress size, thickness, and confirmation of adult assembly.

Toddler Bed Mode and Care Information

Toddler Bed Mode Safety

Safety guidelines and user requirements when converting the crib to a toddler bed.

Care and Maintenance Guidelines

Instructions for periodic checks, tightening fasteners, and cleaning the crib.

Product Warranty Information

Details on the one-year limited warranty, including coverage and exclusions.

Product Components and Hardware

Hardware Identification

Lists and illustrates all necessary hardware components for assembly.

Box Contents Overview

Lists all major parts included in the crib box, including panels and rails.

Crib Assembly Steps

Installing Mattress Support

Instructions for attaching the mattress support to the crib's cross bars.

Attaching Mattress Support to Sides

Steps for securing the mattress support to the left and right crib sides.

Attaching Headboard

Procedure for attaching the headboard to the mattress support and side assembly.

Attaching Footboard and Drawer Supports

Instructions for attaching the footboard and drawer supports to the crib structure.

Drawer Panel Assembly

Steps for attaching drawer back and front panels to drawer boards.

Inserting the Drawer

Guidance on how to properly insert the assembled drawer into the crib.

Converting Crib to Toddler Bed

Step One: Remove Drawer

First step in conversion: remove the drawer from the crib.

Step Two: Detach Footboard and Supports

Remove screws securing drawer supports and detach the footboard.

Step Three: Adjust Mattress Support

Lower the mattress support to the lowest setting for toddler bed mode.

Step Four: Attach Toddler Rail

Attach the toddler rail to the left and right panels using provided bolts.