Baby Brezza Formula Pro Advanced - User Manual

Instructions
for set-up, use and cleaning
Please read fully to ensure your Formula Pro® Advanced works properly every time.
The stirring wheel snaps rmly to the axle.
It’s OK to give it a strong pull to remove it.
Don’t worry, you won’t break it.
Push the drip tray rmly against the base
to make sure it ts securely. Trust us, you
denitely don’t want it to fall o and spill
the entire bottle of formula you just made.
Keep your Formula Pro® Advanced
sparkling clean!
Nice job reading the instruction manual cover-to-cover!
Here are a few extra tips to keep you & your Formula Pro® Advanced happy.
Customer Service
If you are experiencing problems with your Baby Brezza Formula Pro
®
Advanced,
please call Baby Brezza Customer Service at 1-800-667-8184 or email at: service@elfe.ca
before returning the product to the store you purchased it at so that we can oer you
our best service customized to your particular situation.
© 2018 Baby Brezza Enterprises LLC
elfe.com
The limited warranty is valid only on products bought through authorized resellers and used in Canada.
Buying through an unauthorized reseller or using this product outside of Canada automatically voids this warranty.
This warranty is available to consumers only. You are a consumer if you own a Baby Brezza Formula Pro
®
Advanced
that was purchased at retail for personal, family or household use. Except as otherwise required under applicable law,
this warranty is not available to retailers or other commercial purchasers or owners. We warrant that your Baby Brezza
Formula Pro
®
Advanced will be free of defects in material or workmanship under normal home use for one year from
the date of original purchase. Customer will be required to present original proof of purchase in order to obtain the
warranty benets. In the event that you do not have proof of purchase date, the purchase date for purposes of this
warranty will be the date of manufacture. If your Baby Brezza Formula Pro
®
Advanced should prove to be defective
within the warranty period, we will repair it or, if we consider it necessary, replace it.
To obtain warranty services, please call Customer Service at 1-800-667-8184
or write to: service@elfe.ca.
Limited 1-Year Warranty
This product may be covered under one or more of the following including U.S. Patent No. 8,584,901, Canada
Patent No. 2,842,603, China Patent No. CN103874441, Australia Patent No. 2011374309,
Spain Patent No. ES2473790B2 and pending patent application(s)
in the U.S. and other countries.

Summary

Customer Service and Warranty Information

Customer Service Contact

Provides contact details for customer service and troubleshooting assistance.

Limited 1-Year Warranty Terms

Outlines the warranty coverage, terms, and conditions for the product.

Important Safety Safeguards

General Electrical Appliance Safety

Lists essential safety precautions when using electrical appliances.

Formula ProAdvanced Parts Identification

Disassembly and Component Overview

Explains how to disassemble parts and identifies major components.

Formula ProAdvanced Setup Instructions

Initial Assembly Guide

Step-by-step instructions for assembling the machine's parts.

Stirring Wheel Installation

Details the correct procedure for installing the stirring wheel.

Formula ProAdvanced Operation

Controls and Display Overview

Explains the control panel buttons, LCD display, and indicators.

Settings and Warnings

Details how to select settings and interpret warning symbols.

Bottle Preparation Steps

Initial steps for preparing the first bottle, including container and drip tray.

Making Your Bottle

Selecting Powder and Water

Guide to choosing the correct powder setting and water volume.

Dispensing and Checking Formula

Steps for dispensing formula and verifying the final level.

Powder Level Management

Important advice on refilling the powder container for accurate measurement.

Cleaning and Maintenance

Daily Cleaning Procedures

Instructions for daily cleaning of the funnel and dispensing hole.

Monthly Cleaning and Descaling

Guide for thorough monthly cleaning and descaling the machine.

Storage, Errors, and Troubleshooting

Long Term Storage Guidance

Steps to prepare the machine for long-term storage.

Error Codes and Solutions

Explanation of error codes and troubleshooting for common issues.

Baby Brezza Formula Pro Advanced Specifications

General

Brand	Baby Brezza
Model	Formula Pro Advanced
Category	Dispenser
Bottle Size Range	2 oz to 10 oz
Mixing Technology	Patented mixing technology
Temperature Settings Details	Room temperature, body temperature, warmer than body temperature
Color	White
Formula Compatibility	All formula types
Water Tank Capacity	50 oz
Temperature Settings	3
Cleaning	Dishwasher safe parts
Formula Container Capacity	700g
Power Source	Electric