Baby Jogger city GO User Manual

1
FAILURE TO PROPERLY USE THIS CHILD RESTRAINT INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN A SUDDEN STOP OR CRASH.
KEEP INSTRUCTIONS FOR FUTURE USE
Do not install or use this child restraint until you read, understand and follow the
instructions in this manual and the warnings on the car seat..
car seat & base
PD349383B
babyjogger.ca

Baby Jogger city GO Specifications

General

Harness type	5-point harness
Product Type	Infant Car Seat
Car Seat Base Included	Yes
LATCH compatible	Yes
Compatibility	Compatible with Baby Jogger strollers
Safety features	Side Impact Protection
Minimum Child Weight	4 lb
Installation Type	Rear-facing
Height capacity	Up to 32"
Safety Standards	FMVSS 213 certified

Summary

Registering Your Child Restraint

Recall Information

Vehicle Usage Warnings

Airbag and Seating Position Warnings

Critical warnings regarding airbags and safest seating locations in vehicles.

Infant Carrier Usage Warnings

Suffocation, Strangulation, and Fall Hazards

Warnings about hazards like suffocation, strangulation, and falls when using the carrier.

Vehicle Seat Safety Requirements

Correct Seating Position and Locking

Importance of correct seating positions and locking mechanisms for safe installation.

Unsafe Vehicle Seat Belt Types

Incompatible Belt Configurations

Lists vehicle seat belt types that are incompatible with this child restraint.

Safe Vehicle Seat Belt Types

Lap Belt with Locking Latch Plate

Lap Belt with Automatic Locking Retractor (ALR)

Lap/Shoulder Belt with Locking Latch Plate

Lap/Shoulder Belt with Sliding Latch Plate

Adjusting the Car Seat Handle

Using the Body Support Insert

Base Installation: UAS Method

UAS Installation Procedure

Step-by-step guide for installing the car seat base using the UAS system.

Testing UAS Base Installation Tightness

Procedure to verify the secure installation of the base with UAS.

Base Installation: Lap/Shoulder Belt Method

Lap/Shoulder Belt Installation Procedure

Step-by-step guide for installing the car seat base using a lap/shoulder belt.

Testing Lap/Shoulder Belt Base Installation Tightness

Procedure to verify secure installation of the base with a lap/shoulder belt.

Base Installation: Lap Belt Only Method

Lap Belt Only Installation Procedure

Step-by-step guide for installing the car seat base using only the lap belt.

Testing Lap Belt Only Base Installation Tightness

Procedure to verify secure installation of the base with only a lap belt.

Seat Installation Without Base: Lap Belt Only

Lap Belt Only Seat Installation Procedure

Steps for installing the car seat directly using only the lap belt.

Testing Lap Belt Seat Installation Tightness

Procedure to verify secure installation without the base using a lap belt.

Seat Installation Without Base: Lap/Shoulder Belt Only

Lap/Shoulder Belt Seat Installation Procedure

Testing Lap/Shoulder Belt Seat Installation Tightness

Seat Installation Without Base: Lap/Shoulder Belt Only (Alternate Method)

Alternate Lap/Shoulder Belt Seat Installation

Testing Alternate Seat Installation Tightness

Placing Child in the Carrier

Harness and Buckle Preparation

Child Positioning and Harness Adjustment

Adjusting the Buckle Strap

Crotch Strap Clip Adjustment

Securing the Child in the Restraint

Buckling and Chest Clip Fastening

Harness Tightness and Snugness Check

Care and Maintenance Procedures