Baby Jogger POD User Manual

9
1 Squeeze the hand brake to give you better
control over your stroller while jogging or
running or while strolling on uneven terrain.
2 To rotate the hand brake’s position on
the handle bar, loosen the bolt using the
supplied Allen wrench. Rotate the hand
brake assembly on the handlebar until it is
in a comfortable position. Tighten the bolt
to secure hand brake.
Adjusting the hand brake: If you do not have
good braking action, simply squeeze the brake
handle (A) five or six times. If the problem
persists, loosen the brake’s cylinder ring (B) to
adjust the small ring (C) and then move the
small ring away from the handle to tighten the
cable. (Please do not over tighten!) To lock the
rings, tighten the cylinder ring (B) against the
handle while holding the small ring (C) in place.
•
The POD Chassis is equipped with a hand
brake for use with the Jogging Kit and
Stroller Kit.
C
A
B
HAND BRAKE

Baby Jogger POD Specifications

General

Brand	Baby Jogger
Model	POD
Category	Stroller
Language	English