To Next PageTo Next Page
Need help?Do you have a question about the Baby Jogger PERFORMANCE SINGLE and is the answer not in the manual?
General| Stroller Type | Jogging |
|---|---|
| Harness Type | 5-point |
| Frame Material | Aluminum |
| Weight Capacity | 75 lb |
| Wheel Size | 16 inches |
| Brakes | Hand-operated |
| Canopy | Yes |
Critical warnings cover weight limits, child safety, and proper use to prevent injury or damage.
Assemble the stroller frame by unfolding it and connecting the handle assembly with snap locks.
Insert the footplate tab into the holder and snap it onto the stroller frame, securing with a screw.
Install the front wheel by aligning axle flats and securing the brake caliper with the V-brake mechanism.
Gently slide the rear wheel's axle into the hole until it clicks into place for secure installation.
Adjust the seat recline by pinching the strap clamp and sliding the seat down or up.
Learn how to unbuckle, buckle, and adjust the safety harness straps for secure child restraint.
Engage the parking brake by pushing the pedal down and release by lifting. Adjust hand brake as needed.
Attach the canopy bracket to the frame and secure the canopy frame using screws.
Attach the seat to the frame and fasten Velcro straps. Install the basket by securing Velcro straps.
Release snap locks and push the handle frame back to fold the stroller for storage or transport.
Learn steering techniques, use the wrist strap, and understand guidance for use in the dark.
Perform regular maintenance for longevity, checking tire pressure and joints for lubrication.
Wash the seat in cold water and clean the frame with a dry cloth; maintain wheels and store properly.
Register your product online and understand the limited lifetime warranty terms and coverage.
