1 To attach bracket to frame: Unsnap seat
from frame to reveal mounting location.
Use a phillips head screwdriver to attach
bracket screws to frame.
1 Secure canopy straps around stroller frame. 2 To use your canopy simply pull forward to
the desired position.
2 To attach canopy to bracket: Insert canopy
frame into bracket and attach screws using
a phillips head screwdriver.
Canopy
Attaching
Using
2 Fasten the two bottom Velcro straps. One is located near
the front of seat and the other is near the footplate.
Seat
Basket
1 Snap seat to the frame.
• Basket installation
or removal requires
releasing the bottom
section of seat as
shown above to
reveal Velcro strap.
• Snap rear basket straps
around the frame uprights
making sure basket straps go
over the seat anchor straps.
• Fasten front Velcro strap
around the frame above
the footplate.
To Next Page
Loading...
