2 3
1 Insert the footplate tab into
the footplate holder slot.
Footplate
3 Using a phillips head
screwdriver, attach footplate
to stroller frame with screw
supplied (You will find the
screw in the bag with the
instructions).
2 Snap down onto
stroller frame.
1 To install front wheel, lay stroller
back so handle is resting on
floor. Squeeze V-Brake caliper
together to release noodle.
2 Insert the front wheel
into the forktips by
aligning the axle flats
with the forktip flats.
3 Tighten by turning the wheel lever
while holding the opposite side.
4 Squeeze V-Brake caliper together
to secure brake noodle into
V-Brake mechanism.
Front Wheel
NOTE: You will need to rest the stroller handle on the floor in order
to get to the bottom of the footplate.
NOTE: Ensure that the brake caliper is
properly installed before using stroller.
To Next Page
Loading...
Need help?
General
