This document is a user's manual for a Baby Joy Bed Rail Guard, available in both English and French. The product models covered are BB0486, BS10002, BS10012, BS10013, and BS10014. The manual emphasizes the importance of reading and retaining the safety information for future reference.
Function Description:
The Baby Joy Bed Rail Guard is designed to prevent children from falling out of bed. It acts as a protective barrier, providing a secure boundary along the side of the bed. The bed rail guard is suitable for children aged 18 months and older, with a weight limit of up to 16 kg (35 lbs). It is specifically designed for use with standard beds and box spring beds. The manual explicitly states that the bed rail guard is not suitable for waterbeds, senior beds, or bunk beds.
Important Technical Specifications:
- Target User: Children from 18 months and up to 16 kg (35 lbs).
- Minimum Height Requirement: The height of the bed guard must be no less than 16 cm (6.3 inches) to ensure adequate protection.
- Compatibility: Suitable for standard beds and box spring beds only.
- Material: The fabric cloth of the bed rail guard is made from 100% Polyester.
- Mattress Considerations: The manual highlights the importance of correct mattress thickness and hardness. If the mattress is too thin or too soft, there is a risk of the child's head getting caught between the bed guard and the mattress. Conversely, if the mattress is too thick, the bed guard's effective height may be insufficient, compromising its protective function.
Usage Features:
The assembly process involves several steps, clearly illustrated with diagrams:
- Opening the Legs: The S1 and S2 legs of the bed guard are opened, ensuring the tube and feet are at a 90-degree angle.
- Assembling Tubes: Set A tubes (A1, A2) and Set B tubes (B1, B2) are assembled. Set B is formed by connecting B2, B1, and B2 tubes, while Set A is formed by connecting A1, A2, and A1 tubes.
- Connecting Set B to S2: The right side of the assembled Set B is connected to the S2 leg with a "Click" mechanism.
- Inserting Set B into Fabric: The left side of Set B is inserted into the right short side of the fabric cloth.
- Attaching Top Fabric: The top side fabric cloth is completely put onto the assembled structure.
- Covering Tubes with Fabric: The fabric cloth is pulled to cover the Set B and S2 tubes.
- Connecting Set B to S1: The left side of Set B is connected to the S1 leg.
- Covering S1 with Fabric: The fabric cloth is pulled off to cover the S1 leg.
- Inserting Set A into Fabric: Set A tube is inserted into the fabric.
- Fixing Set A to S1 and S2: Both sides of Set A are fixed to S1 and S2 with a "Click" mechanism.
How to Fix the Protective Belt:
The bed rail guard is secured to the bed using a protective belt system:
- Positioning Legs: The two legs of the bed guard are held under the mattress.
- Tightening Strap: The strap is tightened along the bottom of the mattress, forming a "V" shape, which helps to pull the bed guard securely against the mattress.
- Fixing Disc: A disc is fixed on the opposite side of the bed, as illustrated in the "top view" diagram, to anchor the belt and ensure stability.
Usage Warnings and Precautions:
- Entanglement Hazard: To prevent injury by entanglement, the bed rail guard should be removed when the child begins to crawl (i.e., trying to get up on hands and knees).
- Choking Hazard: All small parts and packaging materials must be kept away from babies and children to avoid choking hazards.
- Adult Supervision: The product must always be installed and used under the supervision of an adult.
- Installation Order: Users must read through each step carefully and follow the proper order during installation.
- Part Verification: All packaging should be removed, and all parts and hardware should be separated and counted before installation.
- Correct Installation: It is crucial to ensure all parts are correctly installed, as incorrect installation can lead to danger.
- Assembly Location: It is recommended to assemble the product near its intended area of use to avoid unnecessary movement once assembled.
- Stable Surface: The product should always be assembled on a secure, flat, steady, and stable surface.
Maintenance Features:
While the manual does not explicitly detail maintenance procedures, it provides care instructions for the 100% Polyester fabric material through universal laundry symbols. These symbols indicate:
- Wash at or below 40°C (104°F).
- Do not bleach.
- Do not tumble dry.
- Do not iron.
- Do not dry clean.
These symbols suggest that the fabric component can be cleaned, likely by hand washing or a gentle machine wash, but harsh treatments like bleaching, tumble drying, ironing, or dry cleaning should be avoided to preserve the material's integrity and safety.
Need help?
General
To Next Page