Why is the character pattern not turning out correctly on my Baby Lock ellegante BLG Sewing Machine?
If the character pattern on your Baby Lock Sewing Machine isn't turning out correctly, make sure you're using the correct presser foot. Review and revise the pattern adjustment settings. If you're working with thin or stretch fabrics, attach a stabilizer material. Also, ensure the thread tension is correctly set by adjusting it as needed.
Why can't I thread the needle on my Baby Lock ellegante BLG?
If you cannot thread the needle on your Baby Lock Sewing Machine, ensure the needle is in the correct position by pressing the “Needle Position” button to raise it. This will also ensure the threading hook passes through the eye of the needle. Also, make sure the needle is installed correctly.
What to do if I cannot lower the presser foot with the presser foot lever on my Baby Lock ellegante BLG?
If you cannot lower the presser foot with the presser foot lever on your Baby Lock Sewing Machine, it may be because the presser foot was raised using the “Presser Foot Lifter” button. Press the “Presser Foot Lifter” button again to lower the presser foot.
General| Type | Embroidery and Sewing Machine |
|---|---|
| Needle Threader | Automatic |
| Display Screen | LCD Touch Screen |
| Lighting | LED |
| USB Port | Yes |
| Automatic Thread Cutter | Yes |
| Maximum Sewing Speed | 1, 000 stitches per minute |
| Weight | Approximately 30 lbs |
To Next Page
