Do you have a question about the Baby Love Taurus and is the answer not in the manual?
Instructions for adjusting harness height and buckle.
Steps for securing harness tongues and checking fitment.
Steps for adjusting seatbelt and harness for booster mode.
Steps for fitting seatbelt and sash guide in booster mode.
Specific warnings when using the integrated harness.
Specific warnings when using the seat in booster mode.
Covers supervision, modification, chemicals, crashes, and unattended children.
Component checks, airbag compatibility, second-hand use, and hot storage.
Criteria for using the integrated harness from 6 months.
Procedure for setting shoulder strap height relative to child's shoulders.
Important notes on adjusting crotch strap length before installation.
Feeding seatbelt through the correct path and engaging the buckle.
Attaching the top tether clip to the vehicle upper anchorage point.
Warnings about securing cargo and tether strap safety.
Adjusting shoulder straps to the correct height for the child.
Fitting harness tongues into the buckle and ensuring secure engagement.
Removing slack from harness lap strap for a firm fit.
Steps to disengage seatbelt and top tether to remove restraint.
Description and location of the SecureGuard™™ device.
Criteria for converting to booster mode with vehicle seatbelt.
Steps to store the harness when converting to booster mode.
Locating and connecting the SecureGuard™™ device.
Detailed steps for storing the harness straps and tongues.
Adjusting SecureGuard™™ device and storing connectors.
Ensuring correct buckle position relative to child's legs.
Re-threading anchor plates to adjust SecureGuard™™ device height.
Adjusting sash guide for lengthening, shortening, and positioning.
Determining upright or reclined installation preference for booster mode.
Tightening the top tether strap and storing excess.
Positioning seatbelt, following path labels, and engaging buckle.
Ensuring SecureGuard™™ device is engaged with the harness buckle.
Placing sash belt across chest and through sash guide.
Checklist to verify correct setup of buckle, lap belt, and sash belt.
Connecting harness clips to seat and vehicle anchor points.
Importance of using attachment clip cover and correct engagement.
Procedure to follow after the restraint has been in a severe crash.