baby&child AVA User Manual

1pc
Ava Cabinet [1]
RESTORATION HARDWARE
Page 1 of 3
AVA CHANGING TABLE
ASSEMBLY INSTRUCTIONS
12pcs
Ava changing table topper [2]
2pcs
Steel connecting plates [3]
Instructions to fit the Ava Changing Table Topper to the Top of The Ava Cabinet.
1. Locate 4 pre-drilled holes on the top back side of the Ava Cabinet and align with 4 pre-drilled holes in Ava Topper.
2. Screw 2 steel connecting plates into the pre-drilled holes using 8 screws provided.
3. Follow instructions Anti-Tip kit next page to secure this unit to the wall.
1pc
Parts Included :
25mm
45mm
Product side mounting screws [4]
4pcs
Stud mounting screws [6]
Plastic mounting bracket [5]
2pcsNylon zip tie
4pcs
WARNING:
FALL HAZARD-To prevent death or serious injury from falls, always keep child within arms reach. NEVER LEAVE CHILD
UNATTENDED and always use restraining system.
This changing system is intended for using with children weighing up to 30 lbs.
AVA CHANGING TABLE TOPPER will be used with AVA CABINET, with size 40"W x 18"D x 35"H. Cushion Pad size is
32"W x 16"D x 4"H

baby&child AVA Specifications

General

Brand	baby&child
Model	AVA
Category	Indoor Furnishing
Language	English

Summary

General Safety Warnings

Fall Hazard Warning

Warning regarding fall hazard and the importance of using the restraint system.

Changing Table Topper Assembly

Step 1: Secure Topper to Cabinet

Instructions to fit the Ava Changing Table Topper to the Top of The Ava Cabinet.

Anti-Tip Kit Installation

Step 1: Attach Wall Bracket

Locate a wall stud and attach a bracket to the stud with long screws.

Step 2: Attach Furniture Bracket

Attach a bracket to the furniture frame at the top using short screws.

Step 3: Secure Furniture with Strap

Align wall and furniture brackets, thread strap, and tighten until snug.

Step 4: Final Check

Ensure wall bracket, furniture bracket, and strap are all securely fastened.