BabyGo CHANGE ME - List of Components

CHANGE ME
DE
EN
FR
16 17
NL
Please check the contents of the box against the list below. If anything is
missing, please contact
HONG SHUO KIDS TOY CO., Ltd, for service at
0769-33353270.
Supplied in box:
Table with cushion x1pc Storage basket x2pcs
Box x2pcs PU pocket x1pc
Support tubes A1+A2 Wooden leg with cover x4pcs
Long foot cover x4pcs Screw x4pcs Allen key x1pc
Assembly Contents
INSTALLATION
LIST OF COMPONENTS
ASSEMBLY
1. Install four legs into the changing table and make sure the holes on the legs
face inside.
2. Put the PU pocket through legs
3. Push the support tube A1 to A2 till you hear a ‘click’ sound.
Assembly/Operating Instructions
1. Install four legs into the changing table and make sure the holes on the legs
face inside.
2. Put the PU pocket through legs
3. Push the support tube A1 to A2 till you hear a ‘click’ sound.
Assembly/Operating Instructions
1. Install four legs into the changing table and make sure the holes on the legs
face inside.
2. Put the PU pocket through legs
3. Push the support tube A1 to A2 till you hear a ‘click’ sound.
Assembly/Operating Instructions

Install four legs into
the changing table
and make sure the holes on
the legs face inside.

Put the PU pocket
through legs

Push the support
tube A1 to A2 till you
hear a ‘click’ sound.
Screw x 8
Allen key x 1