BabyGo CUDDLY - Frame Assembly Steps; Assemble Rear Base Frame; Connect Power Cable; Attach Control Unit

IMPORTANT! Toensuresafeoperaonofyourproduct,pleasefollowthese
instruconscarefully.Pleasekeeptheseinstruconsforfuturereference.
IMPORTANT! Before assembly and each use, inspect this productfor
damagedhardware,loosejoints,missingpartsorsharpedges.NEVERuseif
anypartsaremissingorbroken.
IMPORTANT! Adultassemblyisrequired.
FRAME ASSEMBLY
1.JointheleandrightRearBaseFrame
Tubes together by pushing the free
endstogetherunltheyclickandlock
into place. Aach the le and right
RearBaseFrameTubestothe Front
BaseFrameAssembly.(Fig.1)
2.Connectthefreeends ofthepower
cablefromtheControlUnitAssembly
andtheBaseFrameassembly.(Fig.2)
3.AachtheControlUnitAssemblyby
aligningitslowerpostswiththecor-
responding slots on the front base
frameassembly.Ensurethatthepow-
ercableistuckeddownintothelower
compartment and does not become
trapped when pushing the Control
UnitAssemblyintoplace.(Fig.3)
Fig.1
Fig.2
Fig.3
2
1
1
19
Electric Bouncer