BabyGo CUDDLY - Component Installation; Toy Bar Installation; Battery Installation

TOY BAR INSTALLATION
1. Fastenthetoybartotheseatusing
theclipsontheendsofthetoybar.
(Fig.11)
BATTERY INSTALLATION
Remove the baery cover using a
Phillipsscrewdriver.(Fig.12)
InstallfoursizeCbaeriesandreplace
the baery cover. Do not overghten
thescrew.(Fig.13)
BATTERY INSTALLATION
Themusic/swingsunitrequiresfoursizeCbaeries(notincluded).
Itisrecommendedthatyouusealkalinebaeriesforlongerbaerylife.
CAUTION: To prevent possible baery leakage, be sure to follow
the guidelines outlined below.
•Donotmixoldandnewbaeries.
•Donotmixdierenttypes(alkaline,standardcarbon-zinc,orrechargeable
nickel-cadmium).
•Keepbaeriesoutofreachofchildren.
•Alwaysdisposeofbaeriesproperly.
•Removebaerieswhenthebouncerisnotinuseforlongperiodsofme.
•Neverleaveexhaustedbaeriesintheunit.
•Nevertrytorechargenon-rechargeablebaeries.
22
Electric Bouncer
Fig.11
Fig.12
Fig.13