MOVE 360
DE
EN
FR
50 51
NL
REMOVE ISOFIX ATTACHMENT AND HIDE THE SUPPORT LEGINSTALLING METHOD FOR ISOFIX ATTACHMENT
Removing the ISOFIX attachment: Press the „ISOFIX
attachment unlock button“, and hear „click“ sound,
ensure that both sides of the ISOFIX attachment are unlo-
cked, then remove the seat
Hide the support leg: Press the suppor-
ting leg adjustment button and pull the
Support leg up
Press ISOFIX attachment lock released button and
ISOFIX attachment 2nd lock button (as shown in
Figure 19) at the same time, then push ISOFIX attachment
out.
The installation is more convenient, please clip the ISOFIX attachment guide on the ISOFIX
make notch faces upward
Notice: Child safety seats can also be used with the ISOFIX attachment guider.
Notice: If your car seat can adjust the angle, pls adjust the car seat angle to the
appropriate position, it will be more convenient for ISOFIX attachment installation.
Notice: ISOFIX attachment is unlocked correctly only
when the left and right ISOFIX indicator show red.
18
19
button (as shown in F
time, then push ISOFIX
20
21
2.Grab the child seat with both hands
two ISOFIX into the ISOFIX guider un
stuck on both sides, and hear click
is locked, pls push the child saf
the direction of the arrow t
the car seat (figure 21).
23
24
Grab the child seat with both hands, then push the
two ISOFIX into the ISOFIX guider until the ISOFIX
is stuck on both sides, and hear click.When the ISOFIX
is locked, pls push the child safety seat vigorously in the
To Next Page
Loading...
Need help?
General
