EasyManua.ls Logo

BabyGo Nova - Removing and Refitting the Cover

BabyGo Nova
52 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. REMOVING AND REFITTING THE COVER (2)
Release the snap buon one by one, you will take the seat cover o.
When the seat cover is washed you can put it back on again as well.
NOTICE
This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulaon
No. 44,04 series of amendments for general use in vehicles ed with
ISOFIX anchorages systems.
It will t vehicles with posions approved as ISOFIX posions (as detailed in
the vehicle handbook), depending on the category of the child seat and of
the xture.
The mass group and the ISOFIX size class for which this device is intended
is: B1, E
This is a “Unicersal” child restraint. It is approved to Regulaon No. 44,04
series of amendments for general use in vehicles ed most, but not all, car
seats.
A correct t is likely if the vehicle manufactutrer has declared in the vehicle
handbook that the vehicle is eapable of accepng a „Universal” child res-
traint for this age group.
This child restranint has classied as ”Universal” under more stringent con-
dions than those which applied to earlier designs which do not carry this
noce.
If in doubt,consult either the child restranint manufacturer or the retailer.
This child restraint is classied for „(Semi-Universal)“ use and is suitable for
xing intothe seat posions of the following cars:
Seat posions in other cars may also be suitable to accept this child restraint,
if in doubt, consult either the child restraint manufacturer or the retailer.
CAR FRONT REAR
Outer Centre
(For all vehicles equipped with ISOFIX) Yes Yes No
34
Car Seat + Isox
2
1

Related product manuals