EasyManua.ls Logo

BaByliss for MEN EASYCUT E940XE - EASY CUT - CUTS AND MAINTAINS VERY SHORT HAIR; FEATURES; IMPORTANT BATTERY INFORMATION; CHARGING THE CLIPPER

BaByliss for MEN EASYCUT E940XE
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
EASY CUT
CUTS AND MAINTAINS VERY
SHORT HAIR
The BaByliss Easy Cut is a
completely new clipper,
revolutionary in its design, and
ideal for cutting and maintaining
very short hair cuts.
Because of its circular blades,
the clipper can be used in any
direction over the head while
guaranteeing a perfectly even
cut.
The unique comb guide can be
adjusted to 3 dierent lengths: 3,
6 and 9.5mm.
Putting the nishing touches to
the sideburns, around the ears
and at the neckline can be done
with the trimmer for nishing
provided in this pack.
IMPORTANT: Please read the user
manual for the Easy Cut clipper
carefully before using the unit for
the rst time.
This unit is intended only for cutting
hair short and should under no
circumstances be used on the face
or any other part of the body. In
particular, do not use the Easy
Cut clipper near your ears (use the
separate nishing trimmer intended
for this purpose). Never let your ears
get into the clipper blade ring!
FEATURES
1. Multi-directional circular blades.
Stainless steel mobile (91 teeth)
and xed (79 teeth) blades
2. 1 comb guide with 3 settings (3-
6-9.5 mm)
3. Comb guide with locking
mechanism
4. On/O switch
5. Red charging indicator light
6. Green in-operation LED
indicator
7. Adaptor for use on the mains
and for charging (not showed)
8. Finishing clipper (battery
operated)
9. 1 5-position (3-6-9.5-13-16mm)
comb guide for nishing
10. Oil, cleaning brush, storage
pouch (not showed)
IMPORTANT INFORMATION
REGARDING THE NI-MH
BATTERIES OF THIS UNIT
To achieve and maintain
maximum battery capacity,
charge the batteries for 16
hours before using for the rst
time and then approximately
every 3 months. The unit’s full
capacity will only be reached
after three charging and
discharging cycles.
CHARGING THE CLIPPER
1. Insert the power cord into
the unit and into the adapter.
Before using the clipper for the
rst time, allow it to charge for
16 hours. Make sure the switch
on the clipper is in the OFF
position.
ENGLISH