What to do if the head lifts up during use on my BaByliss for MEN SH500E?
If the appliance head of your BaByliss for MEN Electric Shaver lifts up during use and the motor stops, it's likely that you've accidentally pressed the Cleaning or Parking button. To resolve this, simply press the Cleaning or Parking button again to return the appliance to the desired position. If the head has become unclipped, make sure to clip it back in.
Why does my BaByliss for MEN Electric Shaver show 'HI' or 'LO' on the LED screen?
If the LED screen of your BaByliss for MEN Electric Shaver displays “HI” or “LO”, the adapter you are using may not be suitable for charging the appliance. Ensure you are using the adapter that was supplied with the appliance.
What to do if the head of my BaByliss for MEN SH500E Electric Shaver doesn't unclip?
If the appliance head of your BaByliss for MEN Electric Shaver does not unclip after pressing the Cleaning or Parking button, it's likely that the automatic head-raising mechanism is blocked by hair and impurities. You can manually lift the head by pressing simultaneously on the notches on the front and back of the appliance with two fingers. Then, press the Cleaning button and rinse the appliance head under running water, as described in the cleaning chapter, or press the Parking button to store the appliance.
General| Model | SH500E |
|---|---|
| Blade Material | Stainless Steel |
| Battery Life | Up to 60 minutes |
| Waterproof | Yes |
| Run Time | 60 minutes |
| Heads | 3 |
| Quick Charge | No |
| Wet & Dry | Yes |
| Wet/Dry Use | Yes |
| Floating Heads | Yes |
| Trimmer | Yes |
| Cleaning Brush | Yes |
| Travel Lock | Yes |
| Power Source | Rechargeable |
Instructions for safely removing and disposing of batteries and cells from the device.
Detailed specifications and components of the beard trimmer.
Instructions for initial and subsequent charging of the device.
Step-by-step guide on how to start, select length, and use the appliance.
Procedure for thoroughly cleaning the appliance head and body.
Instructions for storing the appliance in its ideal parking position.
Explanation of how the appliance remembers the last cutting length selected.
How to activate and deactivate the lock to prevent accidental use.
Solutions for problems like incorrect adapter use or display errors.
Recommendation for annual replacement of cutting heads for optimal performance.
To Next Page
