Need help?Do you have a question about the BaByliss PRO BAB3031E and is the answer not in the manual?
General| Product Type | Styling Iron |
|---|---|
| Model | BAB3031E |
| Brand | BaByliss PRO |
| Plate Material | Ceramic |
| Temperature Control | Yes |
| Maximum Temperature | 230°C |
| Heat Up Time | 30 seconds |
| Cord Length | 2.5 m |
| Swivel Cord | Yes |
| Auto Shut-off | Yes |
Read and follow crucial safety guidelines for using the hairsetter, including handling heated parts and avoiding skin contact.
Ensure hair is clean and dry before use. Never leave the appliance unattended or plugged in when not in use.
Apply hair to the roller, wind towards the scalp, and secure firmly with a clip for desired curl.
Adjust firmness by heat-up and duration. Remove rollers gently, let curls cool, then style.
Use rollers on the top front layer, then sides and back. Roll sections under towards the neck, remove after 8-10 minutes.
Use two rollers for the top front layer and three for sides/back. Super clips are recommended for better results.
Ensure the unit is off, unplugged, and cool. Wipe with a damp cloth and allow to dry completely.
Remove curlers, soak in warm soapy water, rinse, shake briefly, and dry thoroughly before reuse.
To Next Page
