BaByliss PRO FX862E - Clipper and Accessories Description; Clipper Characteristics; Performance; Blade Durability

5
PROFESSIONAL
RECHARGEABLE CLIPPER
FX862E
7000 RPM
Adaptor CA10M
Vibrations < 2,5 m/s²
LpA (dB(A)) < 70
DESCRIPTION OF THE CLIPPER
AND ITS ACCESSORIES
- Fixed and moving stainless steel
blade
- Cutting length adjustment wheel
with 5 settings (0.6 – 1.2 – 1.8 – 2.4
– 3.0)
- Charging base
- Clipper can be mains or battery
operated
- 8 cutting guides (3-6-9.5-13-16-
19-22-25 mm)
- Light indicator of battery charge
- 8-hour charge time
- Lubricating oil and cleaning
brush included
- Storage case
CHARACTERISTICS
The FX862E professional clipper is
a quality product that combines
the following advantages:
Performance:
7000 blade movements per mi-
nute for an optimal cutting quality
for thick or thin hair.
Durability of the blades:
The FX862E has a stainless steel
xed blade and a stainless steel
moving blade oering outstan-
ding strength, durability and cut-
ting edge.
Good operating autonomy:
This unit has two long-life Ni-MH
batteries providing 75 minutes of
continuous autonomous use of
the clipper (with a full charge and
under normal use conditions).
Ergonomics:
The clipper is ergonomic and fea-
ther light (250g) making it very
comfortable to use.
It has a perfect grip guaranteeing
mastery of the motion and oe-
ring great freedom of movement.
IMPORTANT INFORMATION
REGARDING THIS APPLIANCE’S
NI-MH BATTERIES
To achieve and maintain the grea-
test battery autonomy possible,
charge for 16 hours every 3 months
or so. The product will only achieve
full autonomy after 3 full charge
cycles (one 16-hour cycle followed
by two 8-hour cycles).
OPERATION
Mains charging with use of rechar-
geable batteries:
1. Before using the clipper for the
rst time, allow to charge for 16
hours (the following charging
times will be 8 hours). Make sure
ENGLISH