6 7
ENGLISH
FX880E PROFESSIONAL
CLIPPER
FEATURES
• 45 mm high carbon xed and
moving blade
• High frequency pivot motor
• 9000 movements of blades per
minute
• 5-position detent taper control
1 - 1.8 - 2.5 - 3 - 3.5 mm
• 8 comb attachments
1.5 - 3 - 4.8 - 6 - 10 - 13 - 16 - 19 mm
• 3 m heavy-duty power cord
• Hanging hook
• Includes lubricating oil and
cleaning brush
OPERATING INSTRUCTIONS
Remove the plastic guard protect-
ing the blade. Apply a drop of the
provided lubricating oil across the
blades; wipe o any excess of oil
with a dry cloth.
Plug the clipper into electrical out-
let. Push the «I-ON/0-OFF» switch
to «I-ON» position.
When nished cutting hair, remove
trimmings hair and debris from the
blades using the provided cleaning
brush. Wipe the housing clean with
a dry cloth.
Before replacing blade guard, ap-
ply a few drops of lubricating oil
to the blades to prevent any rust
from occurring, this last procedure
is important for the proper mainte-
nance of the blades.
This quality haircutting instrument
has been manufactured with ex-
treme care. It has been thoroughly
tested and inspected before reach-
ing the professional user.
As with all precision instruments,
there may be a period of breaking
in. If the speed of the motor varies
(as indicated by a change in sound
or pitch), it is an indication of a
change in position of the clipper
or a uctuation in line voltage.
When the clipper is lubricated
in accordance with instructions,
it will deliver ample power and
speed for professional haircutting
requirements.
VERY IMPORTANT: The blade
must be cleaned and oiled before,
during and after each use with the
provided cleaning brush and lubri-
cating oil for proper functioning.
MAINTENANCE OF THE BLADE
Always apply oil to the blades be-
fore, during and after use. This will
ensure maximum cutting perfor-
mance and proper maintenance.
Hold the clipper away from your
body in a downward position, and
apply a drop of BaBylissPRO® lubri-
cating oil on the front and sides of
the cutter blade. Wipe o excess oil
with a soft dry cloth.
Do not pull, twist, or wrap the sup-
ply cord around the appliance.
HOW TO USE COMB
ATTACHMENTS
To use the comb attachments, turn
the clipper to «0-OFF» position.
Slide the comb attachment onto
Comb Attachment
#1 – 3 mm
Comb Attachment
#2 – 6 mm
Comb Attachment
#3 – 10 mm
Comb Attachment
#4 – 13 mm
Comb Attachment
#5 – 16 mm
Comb Attachment
#6 – 19 mm
Blade Guard
Cutting Blade
Cleaning Brush
Lubricating Oil
Taper
Lever
3 m professional
cord
Comb Attachment
#1.5 – 4.8 mm
Comb Attachment
# .5– 1.5 mm
To Next Page
Loading...
