Do you have a question about the BaByliss HYDRO-FUSION 2100 and is the answer not in the manual?
Brand | BaByliss |
---|---|
Model | HYDRO-FUSION 2100 |
Category | Hair Dryer |
Language | English |
Appliance gets hot. Keep out of reach of children and use extra care around them. Do not use on very young children.
UK specific: Do not use in bathroom. Outside UK: Unplug after use in bathroom due to water proximity risks. Consider RCD.
Do not use near water sources like bathtubs, showers. Do not immerse. Unplug after bathroom use outside UK.
Inspect for damage before use. Do not use damaged appliance or lead. Seek professional repair for lead damage.
Do not leave unattended. Avoid looking into barrel. Handle overheating with thermostat shutdown.
Keep vents clear, avoid heat-sensitive surfaces, prevent skin contact. Allow to cool before storing. Coil lead loosely.
Towel dry hair, plug in, select settings. Keep rear away from hair. Switch off, unplug, cool before storing.
Utilize 3 heat and 2 speed settings, plus cold shot, for drying and styling based on hair condition.
Use Concentrator Nozzle for airflow direction and Diffuser for curls/volume, both on lowest heat/speed.
Ensure appliance is off, unplugged, and cool. Wipe exterior with damp cloth. Coil lead loosely. Always unplug after use.
Ensure appliance is off, unplugged, and cool. Twist rear filter left to remove, clean debris with a soft brush, and replace securely.
3-year guarantee for UK consumer use against defects in materials or manufacture under normal use.
Excludes use on incorrect voltage, unauthorized stockists, professional use, unauthorized repairs, misuse, or not following instructions.
Contact Conair Customer Care Line for queries regarding authorized stockists, refunds, repairs, or replacements.
Retain proof of purchase for any refund, repair, or replacement service. Guarantee runs from original purchase date.
Contact Conair Customer Care for advice or product returns. Includes return address and required documentation.
Do not treat as household waste. Dispose of via appropriate collection points for electrical/electronic equipment recycling.