4
Straightening iron
BAB2091EPE
The BaBylissPRO® BAB2091EPE is a
high-tech appliance that has been
specially studied and designed to
straighten any hair type perfectly
in just one stroke.
EP TECHNOLOGY 5.0
A micrometric metallic coating
obtained by electroplating, a very
technical process similar to what is
done in jewelry avoiding friction
on hair for even more smoothness,
containing no chemical agents for
better resistance to high-heat and
providing even heat distribution
all through the plates.
• 3 x harder & longer lasting
• 3 x smoother
• Hard-wearing to chemicals
• Lasting & perfect results
• Hair respected & sublimated
Advanced Heat Management™
System
The straightener combines the
latest in self-regulating heating el-
ements, the Advanced Heat Man-
agement™, which provides precise
and continuous electronic regula-
tion of the temperature. This tech-
nology means the unit heats up
immediately, reaching a very high
temperature and maintaining the
temperature to the nearest half
degree.
It also has a broad range of recu-
peration reaction and capacity.
Ionic technology
Hair is by nature charged positively,
this positive charge is strength-
ened further during drying and
generates static electricity that
makes the hair scales push away
from each other. The hair’s surface
thus becomes rough and the hair
looks lifeless.
The negative ions generated by
the straightening iron neutralise
this positive charge and so elimi-
nate static electricity. With the hair
cuticles properly closed, your hair
is soft and shiny, easy to style.
It has also been proven that ionic
technology catalyses the action of
hair products.
USE
This straightening iron becomes
very hot, especially when set to
maximum. We recommend always
establishing the hair type before
straightening and always test it on
a strand of hair to check that the
setting is appropriate for the hair.
The plates heat up very quickly and
should not touch the skin or scalp.
We recommend keeping the iron
about 1 cm from the scalp at all
times.
• Plug the unit into an electrical
outlet and press the on/o but-
ton (I/0) to turn it on.
• Use the digital control buttons
(+/-) to select the desired tem-
perature.
• After use, press the on/o button
ENGLISH
To Next Page
Loading...
