not exceeding 30 mA is advisable
in the electrical circuit supplying
the bathroom. Ask your electrician
for advice.
LIGHTWEIGHT AND ERGONOMIC
The BaBylissPRO™ Italo/Carrera Hair
Dryer has an ergonomic handle that
makes it very comfortable to use. Its
light weight and ideal balance make it
perfect for the salon.
CONCENTRATOR NOZZLES
The BaBylissPRO™ Italo/Carrera
Hair Dryer comes with 1 different
concentrator nozzle:
- one beveled, large 6x60mm nozzle
for smoother blow-drying; it is slightly
diagonal in shape, hugging the shape
of the brush perfectly.
USER MAINTENANCE
Your dryer is virtually maintenance
free. No lubrication is needed. The
dryer must be kept clean for proper
operating performance. When cleaning
is needed, unplug the cord, allow to
cool and clean dust and lint from air
intake openings with a small brush
or the brush attachment of a vacuum
cleaner. The outer surface of the dryer
should be wiped clean with a cloth only.
Blocked or clogged air intake vents
will cause the dryer to overheat.
If overheating occurs, an automatic
safety device will shut the dryer or the
heat off to prevent damage or personal
injury. If the unit or the heat cycles off,
turn the dryer off, unplug the cord, and
allow the dryer to cool for 10 to 15
minutes before restarting. Make sure
the air vents are clean.
CAUTION
NEVER allow the power supply cord
to be pulled, twisted, or severely bent.
Never wrap the cord tightly around
the dryer. Damage will occur at the
high flex point of entry into the dryer,
causing it to rupture and short. Inspect
the cord frequently for damage.
Stop use immediately if damage
is visible or unit stops or operates
intermittently.
If the cord or dryer is damaged or does
not operate properly, return it for repair
to place of purchase or to an authorized
BaBylissPRO™ service representative
only. No repairs should be attempted by
the consumer
STORAGE – IMPORTANT
When not in use, your dryer should
be disconnected, allowed to cool and
stored in a safe, dry location, out of
reach of children. Do not wrap line cord
around dryer. Allow the cord to hang
or lie loose and straight at the point of
entry into the dryer.
To Next Page
Loading...
