To Next PageTo Next Page
Need help?Do you have a question about the babymoov Rapido and is the answer not in the manual?
Details the sterilizer's power, speed, universality, accuracy, and practical features.
Highlights automatic operation, compliance with EN standards, and hygienic design.
Describes the sterilizer's good looks, ergonomic hood handle, and fashionable colors.
Outlines critical steps for perfect sterilization, including hand washing and pre-rinsing bottles.
Fill the sterilizer tank with 80 ml water using the graduated goblet.
Assemble the bottle-holder basket correctly until it clicks into place.
Place bottles upside-down in the holder so steam can enter them directly.
Position bottle necks in the holder openings or between them if too wide.
Place accessories like teats and rings on the accessory basket.
Cover the sterilizer with the hood, ensuring it's properly positioned.
Plug in the appliance and press the 'On' button to start the process.
Use hygienic tongs to remove sterilized items once the indicator lamp turns off.
Adhere to all safety instructions for proper and safe operation of the sterilizer.
Clean with a damp cloth and de-scale using a vinegar solution as needed.
Keep the appliance in its original packing in a dry, cool place away from children.
Check the 'On' button and power connection if the sterilizer does not heat up.
Ensure the correct water amount (80 ml) is used for proper cycle times.
Details the sterilizer's power, speed, universality, accuracy, and practical features.
Highlights automatic operation, compliance with EN standards, and hygienic design.
Describes the sterilizer's good looks, ergonomic hood handle, and fashionable colors.
Outlines critical steps for perfect sterilization, including hand washing and pre-rinsing bottles.
Fill the sterilizer tank with 80 ml water using the graduated goblet.
Assemble the bottle-holder basket correctly until it clicks into place.
Place bottles upside-down in the holder so steam can enter them directly.
Position bottle necks in the holder openings or between them if too wide.
Place accessories like teats and rings on the accessory basket.
Cover the sterilizer with the hood, ensuring it's properly positioned.
Plug in the appliance and press the 'On' button to start the process.
Use hygienic tongs to remove sterilized items once the indicator lamp turns off.
Adhere to all safety instructions for proper and safe operation of the sterilizer.
Clean with a damp cloth and de-scale using a vinegar solution as needed.
Keep the appliance in its original packing in a dry, cool place away from children.
Check the 'On' button and power connection if the sterilizer does not heat up.
Ensure the correct water amount (80 ml) is used for proper cycle times.
General| Brand | babymoov |
|---|---|
| Model | Rapido |
| Category | Steriliser |
| Language | English |
