Bacharach Leakator 10 Manual

Maintenance
Leakator 10
Instruction 0019-9167
5.1 R e p laci ng th e Se n s o r
Note that If the resistor leads are cut
too short, the instrument may not function.
Notice that
the sensor’s six pins and the socket are symmetrical and not
keyed, thus permitting the sensor to be plugged in two ways.
The socket, however, is wired so that it doesn’t matter which
way the sensor is installed.
All manuals and user guides at all-guides.com

Bacharach Leakator 10 Specifications

General

Brand	Bacharach
Model	Leakator 10
Category	Gas Detectors
Language	English