, begin by assembling the mixing jar.
smoothie maker, begin by assembling the mixing jar.smoothie maker
1. Position the rubber gasket down onto the circular fl at surface in the blade
lade base on the bottom of the mixing
by twisting the blade base
clockwise until tightened onto the mixing jar. Make sure that the blade base is
tightly fastened to the mixing jar and that the rubber gasket is properly com-
pressed between the mixing jar and the blade base.
Push the lid onto the top of the mixing jar and twist to lock into place. Place
the clear lid cap in the center of the lid or place the stir stick through the
center of the lid if blending liquids or frozen drinks.
4. Place the mixing jar onto the motor base so that the bottom of the blade base
is sitting fl at on the motor base.
To Next Page
Loading...
Need help?
General
