7
OPERATION
Use and Care (Assembly)
To use your smoothie maker, begin by assembling the mixing jar.
1. Position the rubber gasket down onto the circular flat surface in the blade
base.
2. Screw blade base on the bottom of the mixing jar by twisting the blade base
clockwise until tightened onto the mixing jar. Make sure that the blade base is
tightly fastened to the mixing jar and that the rubber gasket is properly com-
pressed between the mixing jar and the blade base.
3. Push the lid onto the top of the mixing jar. Place the clear lid cap in the center
of the lid or place the stir stick through the center of the lid if blending liquids
or frozen drinks.
4. Place the mixing jar onto the motor base so that the bottom of the blade base
is sitting flat on the motor base.
5. Plug in the cord. Your smoothie maker is now ready to use!
Mixing Jar
Stir Stick
Dispensing Valve
Rubber Gasket
Blade Base
Lid Cap
Motor Base
Lid
To Next Page
Loading...
Need help?
General
