Need help?Do you have a question about the Backbeat Go 2 and is the answer not in the manual?
General| Type | In-ear |
|---|---|
| Wireless | Yes |
| Bluetooth | Yes |
| Charging Time | 2.5 hours |
| Noise Isolation | Passive |
| Microphone | Yes |
| Bluetooth Version | 3.0 |
| Weight | 14 grams |
| Driver Size | 6mm |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 16 Ohms |
| Battery Life | 4.5 hours |
| Range | 10 meters |
| Remote Control | Yes |
| Water Resistance | Sweat-resistant |
Guides initial Bluetooth pairing for first-time use.
Instructions for pairing the headset with multiple devices.
Enables seamless switching between multiple paired devices.
How to check the remaining battery level via voice or indicator lights.
Steps to power the earbuds on and off.
Managing audio playback, volume, and call handling.
Extends battery life by entering a low-power state when inactive.
Information on maintaining Bluetooth connection and reconnection.
List of audible prompts the headset provides.
Steps to reset the earbuds to their original factory configuration.
To Next Page