STEP ONE: AFFIX SEAT TO LEGS
• With help of one other person, carefully hold Seat (B) in
place and align with holes in Leg (A).
• Insert Short Bolt (D), Washer (F) through Leg (A) and then
Seat (B). Secure with Washer (F), Nut (G) using the
provided Allen Wrench (I) and Wrench (J).
• Repeat for the other leg.
STEP TWO: AFFIX BACKREST TO LEGS
• With help of another person, carefully hold Backrest (C) in
place and align with holes in Leg (A).
• Insert Long Bolt (E), Washer (F) through Leg (A) and then
Backrest (C). Secure with Washer (F), Nut (G) using the
provided Allen Wrench (I) and Wrench (J).
• Repeat on the other side.
STEP THREE: PLACE ON LEVEL GROUND
• Tighten all bolts and put on Nut Cap (H).
• Now your bench is ready to use!
BACKYARD CREATIONS® MANUFACTURER‘S WARRANTY (Limited 1-Year Warranty)
This product is covered under the manufacturer’s one year limited warranty against defects in workmanship and materials. If your
product fails structurally during normal use within one year of purchase, the manufacturer will repair or replace the defective unit at no
charge. The warranty excludes furniture used for commercial purposes, furniture damaged by act of nature, abuse or lack of proper
care or corrosion or rusting of metal frame and hardware. Proof of purchase (dated register receipt) and in some cases photos of the
product are required for warranty claims. Maintain your outdoor furniture by using furniture covers and store away during extreme
weather conditions.
SAVE YOUR RECEIPTS. THIS WARRANTY IS VOID WITHOUT THEM.
Test Rite Products Corp. 1900 S. Burgundy Place, Ontario, CA 91761 Made in China
To Previous Page
Loading...
