EasyManua.ls Logo

Backyard Discovery CEDAR COVE 2001053 - User Manual

Backyard Discovery CEDAR COVE 2001053
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Made in China | INS-2001053-A-CEDAR COVE-ENG 11-25-19
For the most up to date assembly manual,
to register your set, or to order replacement parts please visit
www.backyarddiscovery.com
SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE IN THE EVENT THAT
YO
U NEED TO ORDER REPLACEMENT PARTS.
Model # 2001053
CEDAR COVE
Owner's Manual & Assembly Instructions
MANUFACTURED BY:
Bac
kyard Discovery
3305 Airport Drive
Pittsburg, KS 66762
800-856-4445
average 2 person assembly time
assembly time may vary based on skill level
Wooden Swing Set
average tube slide assembly time
WARNING
NOT SUITABLE FOR
CHILDREN UNDER 36
MONTHS. SMALL PARTS.
Question and Answer IconNeed help?

Do you have a question about the Backyard Discovery CEDAR COVE 2001053 and is the answer not in the manual?

Summary

Product Warnings and Information

Age and Small Parts Warning

Warning about age suitability and small parts.

Missing Parts or Assembly Questions

Contacting Support for Assistance

How to contact customer service for assistance with parts or assembly.

Limited Warranty Details

Operating Instructions and Safety Warnings

Child Safety Guidelines

Rules to reduce injury risk, including supervision and proper usage.

Safe Slide and Swing Usage

Specific safety rules for using slides and swings.

Burn Hazard Awareness

Warning about hot surfaces due to sunlight exposure.

Playcenter Positioning Guide

Choosing a Safe Location

Guidelines for selecting a level site with adequate clearance from obstructions.

Playground Surfacing Guide

Recommended Surfacing Materials

Types of materials like wood chips, sand, and gravel for shock absorption.

Surfacing Depth and Installation

Minimum depth requirements and installation best practices.

Appendix A: Playground Surfacing

CPSC Surfacing Recommendations

Guidelines from CPSC on selecting and installing protective surfacing.

Loose-Fill Surfacing Details

Specific depth and maintenance guidelines for loose-fill surfacing.

Avoid Hard Surfaces

Warning against installing equipment over hard surfaces like concrete or asphalt.

Proper Maintenance Procedures

Seasonal Hardware and Component Checks

Instructions for tightening hardware and inspecting components at the start of the season.

Regular Surfacing and Wood Care

Guidelines for maintaining surfacing depth and protecting wood components.

Additional Maintenance Tasks

Bi-weekly and monthly checks, including swing beam and wood inspection.

Assembly Tips and Hardware

Preventing Bolt Protrusion

How to avoid bolt protrusion by using correct hardware and tightening.

Hardware Assembly Methods

Instructions for T-nut, barrel nut, and lag screw assembly.

Assembly Preparation

Organizing Wood Parts

Recommendation to arrange wood parts by number before assembly.

Organizing Hardware

Advice on sorting hardware bags by number or type for easier assembly.

Tools and Assembly Icons

Required Installation Tools

Visual guide to tools required for assembly.

Interpreting Assembly Icons

Explanations of icons used in the manual for assembly steps.

Understanding Tool Measurements

How to identify specific wrench sizes using fractional representations.

Setup Dimensions and Play Area

Playset Placement and Leveling

Instructions for placing the set level and ensuring it's square during assembly.

Safe Play Area Guidelines

Definition and dimensions of the safe play area around the unit.

Parts Identification: Wood Components

Wood Components (A1-E14)

Identification and specifications for various wood structural components.

Parts Identification: Hardware Components

Hardware Components - Bolts

Listing and identification of various bolt types and sizes used in assembly.

Parts Identification: Accessory Components

Accessory Components - Tools and Slides

Identification of accessory components like torx wrenches, bits, slides, and supports.

Ladder Assembly - Step 1

Ladder Part E15 and H16 Installation

First step in assembling the ladder structure using specific components and hardware.

Ladder Assembly - Step 2

Ladder Part E16 Installation

Second step in assembling the ladder structure, adding middle upright.

Ladder Assembly - Step 3

Ladder Part M12 Installation

Third step in ladder assembly, attaching the rear support.

Ladder Assembly - Step 4

Ladder Parts E17 and H1 Installation

Fourth step in ladder assembly, attaching attachment board and right upright.

Fort Assembly - Step 5

Ladder Assembly - Step 6

Ladder Assembly - Step 7

Ladder Assembly - Step 8

Ladder Assembly - Step 9

Slide Assembly - Step 1

Slide Assembly - Step 2

Slide Assembly - Step 3

Slide Assembly - Step 4

Slide Assembly - Step 5

Swing Beam Assembly - Step 1

Swing Beam Assembly - Step 2

Swing Beam Assembly - Step 3

Swing Beam Assembly - Step 4

Fort Assembly - Step 1

Fort Assembly - Step 2

Fort Assembly - Step 3

Fort Assembly - Step 4

Fort Assembly - Step 6

Fort Assembly - Step 7

Fort Assembly - Step 8

Fort Assembly - Step 9

Fort Assembly - Step 10

Fort Assembly - Step 11

Fort Assembly - Step 12

Fort Assembly - Step 13

Fort Assembly - Step 14

Fort Assembly - Step 15

Fort Assembly - Step 16

Fort Assembly - Step 17

Fort Assembly - Step 18

Fort Assembly - Step 19

Fort Assembly - Step 20

Fort Assembly - Step 21

Fort Assembly - Step 22

Fort Assembly - Step 23

Fort Assembly - Step 24

Fort Assembly - Step 25

Fort Assembly - Step 26

Fort Assembly - Step 27

Fort Assembly - Step 28

Fort Assembly - Step 29

Fort Assembly - Step 30

Fort Assembly - Step 31

Fort Assembly - Step 32

Fort Assembly - Step 33

Fort Assembly - Step 34

Fort Assembly - Step 35

Fort Assembly - Step 36

Fort Assembly - Step 37

Fort Assembly - Step 38

Fort Assembly - Step 39

Fort Assembly - Step 40

Fort Assembly - Step 41

Fort Assembly - Step 42

Fort Assembly - Step 43

Fort Assembly - Step 44

Web Swing Setup

Assembling the Web Swing

Instructions for assembling the web swing using bolts, nuts, and rope loops.

Swing Beam and Swing Attachment

Slide Attachment to Fort

Tube Slide Installation

Ground Stake Installation

Backyard Discovery CEDAR COVE 2001053 Specifications

General IconGeneral
Model Number2001053
CategoryPlay Sets & Playground Equipment
MaterialCedar Wood
ColorNatural Wood
Age Recommendation3-10 years
Recommended Age3-10 years
Assembly RequiredYes
Product NameBackyard Discovery CEDAR COVE
Featuresswings, slide

Related product manuals