STEP 132 - CABINET DOOR ADJUSTMENT (AS NEEDED)
- ONLY KITCHEN CABINETS ARE SHOWN FOR DETAIL.
-ADJUST
HINGES (AS NEEDED)
50
THAT THE GAP AROUND
ALL
DOORS
15
THE
SAME AND THERE
15
NO INTERFERENCE BETWEEN DOORS AND CABINETS.
-ADJUST
MAGNET CATCH BRACKETS AS NEEDED.
LOOSEN SCREWS TO ADJUST
MAGNET BRACKET, UNTIL IT
COMES IN CONT
ACT
WITH
DOOR IN THE SHUT POSTION
SCREW#1:
SCREW CLOCKWISE TO BRING EDGE OF DOOR
AWAY
FROM
CABINET. SCREW COUNTER CLOCKWISE TO BRING EDGE OF DOOR
CLOSER TO CABINET
SCREW#2
:
LOOSEN THESE SCREWS TO SLIDE DOOR TOWARD CABINET OR
AWAY
FROM CABINET
To Next Page