Backyard Discovery HILLCREST - Ground Stake Installation; Securing the Fort with Auger Stakes

STEP 48 - FORT ASSEMBLY
QTY
PART NUMBER
DESCRIPTION
8 H100004
NUT BARREL WH 5/16x5/8
8 H100031 WASHER LOCK EXT 12x19
2
H100008
BOLT WH 5/16x1
2 H100009 BOLT WH 5/16x1 1/4
4 H100222 BOLT WH 5/16x3/4
AUGER GROUND
STAKE
(x6)
A100178
GROUND STAKE
REBAR
(x2)
A4M00527
DETAIL (A)
DETAIL (A)
DETAIL (B)
DETAIL (B)
DETAIL (B)
DETAIL (B)
DETAIL (C)
DETAIL (C)
DETAIL (A)
DETAIL (B)
DETAIL (C)
008 (x2)
BOLT - 5/16x1"
031 (x2)
WASHER - 12x19
004 (x2)
NUT BARREL - 5/8"
222 (x4)
BOLT - 3/4"
031 (x4)
WASHER - 12x19
004 (x4)
NUT BARREL - 5/8"
009 (x2)
BOLT - 1 1/4"
031 (x2)
WASHER - 12x19
004 (x2)
NUT BARREL - 5/8"
527 (x2)
GROUND STAKE REBAR
178 (x4)
AUGER GROUND STAKE
178 (x2)
AUGER GROUND STAKE
TWIST GROUND STAKE (178) INTO
GROUND AT LOCATIONS SHOWN.
USING GROUND STAKE AS A GUIDE,
DRILL A 7/16" [10mm] HOLE FOR
HARDWARE.
DRIVE GROUND STAKE (527) INTO
GROUND AT LOCATIONS SHOWN.
USING GROUND STAKE AS A GUIDE,
DRILL A 7/16" [10mm] HOLE FOR
HARDWARE.
83