EasyManua.ls Logo

Backyard Discovery ATLANTIS - User Manual

Backyard Discovery ATLANTIS
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Made in China
INS-1608016B-ATLANTIS-ENG 12-9-21
Please visit www.backyarddiscovery.com
For the most up to date assembly manual, to register your set, or to order replacement parts
Para obtener instrucciones en español, visite www.backyarddiscovery.com
Model # 1608016B
ATLANTIS
MANUFACTURED BY:
Backyard Discovery
3305 Airport Drive, Pittsburg, KS 66762
800-856-4445
Swing Set
Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476
J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands
WARNING
Adult Assembly Required.
Not suitable for children under 36 months due to small parts.
FOR DOMESTIC USE ONLY. INTENDED FOR OUTDOOR USE.
Question and Answer IconNeed help?

Do you have a question about the Backyard Discovery ATLANTIS and is the answer not in the manual?

Summary

Basic Setup & Assembly Notes

Safe Play Area Diagram

Diagram illustrating safe play area dimensions and clearances.

General Information

Important details on set design, usage, and capacity limits.

Parts Identification: Wood Components

Parts Identification: Hardware Components

Parts Identification: Accessory Components

Pre-Assembly: Sorting Parts

Wood Parts Organization

Instructions for organizing wooden components by their stamped numbers.

Hardware Parts Organization

Recommendations for organizing hardware by part number or type.

Pre-Assembly: Tools Required

Pre-Assembly: Assembly Method Options

Ladder Assembly: Step 1

Ladder Assembly: Step 2

Ladder Assembly: Step 3

Bay Window Assembly: Step 1

Rock Wall Assembly: Step 1

T-Nut Installation Tip

Tip to install T-nuts into boards before attaching rock climbing holds.

Rock Placement Guidance

Instruction to place climbing rocks with finger grips upward.

Slide Assembly: Step 1

Slide Surface Orientation

Note on the orientation of the slide bed's dull side towards the ground.

Slide Brace Placement

Guidance on centering the slide brace and drilling pilot holes.

Assembly Tips for Slide

Tips for prebending slide ends and warming it in the sun.

Swing Beam Assembly: Step 1

Hand-Tighten Bolts

Instruction to leave specific bolts hand-tight for later adjustment.

Fort Assembly: Step 1

Pilot Hole Location Note

Note indicating the location for pilot holes during assembly.

Fort Assembly: Step 2

Pilot Hole Locations Note

Note indicating specific locations for pilot holes during assembly.

Fort Assembly: Step 3

T-Nut Installation Tip

Tip to install T-nuts into boards before proceeding with assembly.

Fort Assembly: Step 4

T-Nut Installation Tip

Tip to install T-nuts into boards before proceeding with assembly.

Fort Assembly: Step 5

Fort Assembly: Step 6

Bracket as Guide for Drilling

Using a bracket as a guide to drill pilot holes.

Floor Runner Placement Tip

Tip to center the floor runner board on the bottom of the floor.

Fort Assembly: Step 7

T-Nut Installation Tip

Tip to install T-nuts into boards before assembly.

Fort Assembly: Step 8

T-Nut Installation Tip

Tip to install T-nuts into boards before assembly.

Fort Assembly: Step 9

T-Nut Installation Tip

Tip to install T-nuts into boards before assembly.

Bracket as Guide for Drilling

Using a bracket as a guide to drill pilot holes.

Fort Assembly: Step 10

T-Nut Installation Tip

Tip to install T-nuts into boards before assembly.

Fort Assembly: Step 11

Complete Assembly Twice

Instruction to complete this assembly step two times.

Fort Assembly: Step 12

Fort Assembly: Step 13

Fort Assembly: Step 14

Picket Spacing Tip

Tip to space boards evenly using a picket pal for consistent gaps.

Fort Assembly: Step 15

Bracket as Guide for Drilling

Using a bracket as a guide to drill pilot holes.

Fort Assembly: Step 16

Bracket as Guide for Drilling

Using a bracket as a guide to drill pilot holes.

Board Spacing Tip

Tip to space boards evenly to minimize gaps.

Fort Assembly: Step 17

Fort Assembly: Step 18

Fort Assembly: Step 19

Board Spacing Tip

Tip to space boards evenly to minimize gaps.

Picket Spacing Tip

Use picket pal for picket spacing to ensure even gaps.

Fort Assembly: Step 20

Fort Assembly: Step 21

Bay Window Assembly Template

Use bay window assembly as template to drill holes in M9 and L2.

Fort Assembly: Step 22

T-Nut Installation Tip

Tip to install T-nuts into boards before assembly.

Fort Assembly: Step 23

Roofing Start Point Note

Note to start roofing installation at the peak and work downwards.

Final Assembly: Step 1

Final Assembly: Step 2

Slide Opening Placement

Center slide in opening, using dimensions to drill holes for hardware.

Final Assembly: Step 3

Final Assembly: Step 4

Swing Hanging Guidance

Guidance on trimming chain loops and minimum seat height from ground.

Final Assembly: Step 5

Ground Stake Installation

Instructions for twisting ground stakes into place using guides and drilling holes.

Backyard Discovery ATLANTIS Specifications

General IconGeneral
MaterialCedar Wood
Recommended Age Range3 to 10 years
Maximum Number of Occupants9
ColorBrown
Featurestwo belt swings, trapeze bar, picnic table
Included Componentsswings

Related product manuals