Backyard Products GABLE - 10 x 12 FLOOR PANEL INSTALLATION; REQUIRED PARTS FOR 10 x12 FLOOR PANELS; STEP-BY-STEP 10 x12 FLOOR PANEL INSTALLATION

18
PARTS REQUIRED:
10' x 12' FLOOR PANELS
(Not Included)
x55
2" (5 cm)
DOOR
Install(1) 48" x 48" panel with the rough side up (painted-grid lines side) on
Section 2 with the 48" edge and corner ush to the oor frame and Section 1.
Secure using 2" nails spaced 6" apart on edges and 12" apart inside
panel. Use a chalk line or use pre-painted grid lines to nail into joists
under panel.
2
BEGIN
1
x1
6" (15 cm) edges of panel.
120"
(305 cm)
48"
(122 cm)
12" (30,5 cm)
inside panel.
Grid lines
UP.
48"
(122 cm)
Flush
92-5/8"
(235 cm)
3/4" (19 mm)
Approximately
48" x 48"
(122 x 122 cm)
Section 2
Section 1
FLOOR PANELS NOT
INCLUDED. SEE PAGE 8
FOR PANEL SIZES
AND QUANTITIES.