Backyard Products GABLE - BEFORE YOU BEGIN; BUILDING RESTRICTIONS AND APPROVALS; ENGINEERED DRAWINGS; SURFACE PREPARATION

KEEP THIS MANUAL FOR FUTURE REFERENCE
ASSEMBLY MANUAL
BUILDING SIZE
GABLE
10' x 8' (305 x 244)
ACTUAL FLOOR SIZE
10' x 8' (305 x 244 cm)
BASE MODEL
10' x 7' 8-5/8" (305 x 235,3 cm)
10' x 12' (305 x 365,8 cm)
ADD ONE 10' x 4'
10' x 11' 8-5/8" (305 x 357,2 cm)
10' x 16' (305 x 487,7 cm)
ADD TWO 10' x 4'
10' x 15' 8-5/8" (305 x 479 cm)
12/20/202116770-C
BEFORE YOU BEGIN
IMPORTANT!
READ INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING ASSEMBLY.
• BUILDING RESTRICTIONS AND APPROVALS
Be sure to check with local building department and homeowners association for specic restrictions and/ or requirements before building.
• ENGINEERED DRAWINGS
Contact our Customer Service Team if engineered drawings are needed to pull local permits.
• SURFACE PREPARATION
To ensure proper assembly you must build your shed on a level surface.
Recommended methods and materials to level your shed are listed on page 9.
• CHECK ALL PARTS
Inventory all parts listed on pages 3 - 5. Contact our Customer Service Team if any parts are missing or damaged.
• ADDITIONAL MATERIALS
You will need additional materials to complete your shed. See page 6 for required and optional materials and quantities.
***CONTACT OUR CUSTOMER SERVICE TEAM
IF ANY PARTS ARE MISSING OR DAMAGED***
Call: 1-877-743-3400 email: customerservice@backyardproductsllc.com