Backyard Products GABLE - SHINGLES - RIDGE CAP INSTALLATION; PREPARING RIDGE CAP PIECES; INSTALLING FIRST AND SECOND RIDGE CAPS

68
SHINGLES - RIDGE CAP
• You will nish off the top of the roof with a ridge cap made from shingles.
Note: • You will need about 20 - 22 cut pieces.
Cut shingles into (3) pieces. Hint: Use cut-off pieces rst.
Score shingle,
then snap-off angled cut.
Install rst ridge cap ush to shingles at front, as shown.
Install second ridge cap 5" back, as shown.
2
3
BEGIN
1
2"
(5 cm)
2"
(5 cm)
2"
(5 cm)
2"
(5 cm)
2"
(5 cm)
2"
(5 cm
Top of slot.
Weather Seal
Flush
(1) Nail per side through weather seal.
(1) Nail per side through weather seal.
5"
12,7 cm
FRONT OF
SHED
FRONT OF
SHED
Flush
20 to 22
Pieces