68
• Use acrylic latex caulk that is paintable. Caulk at all horizontal and vertical seams, between the trim and walls, and all
around the door trim.
• Use a high quality exterior acrylic latex paint. When painting your building, there are a few key areas that can be easily
overlooked that must be painted:
• Bottom edge of all siding and trim
• Inside of doors and all 4 edges
Note:
Prime all un-primed exterior wood before painting.
(Follow directions provided by manufacturer.)
Snip bottom side of drip edge and
bend over to other side of roof.
(Follow directions provided by manufacturer.)
PAINT & CAULK
- NOT INCLUDED -
ROOF FELT
- NOT INCLUDED -
DRIP EDGE
- NOT INCLUDED -
• Install felt ush to all roof edges overlapping 3". Use minimal amount of roong nails to hold in place.
OK to overlap at ridge.
3" OVERLAP
Flush
Flush
Edge ush
to trim.
• Install drip edge over roof felt on gable side and under roof felt on eave side (Fig. A).
• Do not use nails on side of drip edge that hangs over side of building.
• Only nail top of drip edge as shown.
Roof Felt
Drip Edge
Drip Edge
Fig. A
To Next Page
Loading...
Need help?
General