PRE-ASSEMBLY STEP 2 - TOOLS REQUIRED
Cordless Drill or
Electric Drill
Drill Attachments:
Phillips Head
Open End Wrenches 1/2" & 9/16"
Phillips Screw Driver
1/8", 3/16", 3/8" & 7/16"
Drill Bits
3/8" Drive Ratchet, 1/2" &
9/16" STD Sockets 1/2" & 9/16" Deep
Sockets
Claw Hammer
Rubber Mallet - Optional
Tape Measure
Square
Level 24"
To Next Page
Loading...
