Need help?Do you have a question about the Bacsa ACS-Z and is the answer not in the manual?
Covers unit selection, tare, zero functions, and alarm settings for weighing operations.
Details full range and random load calibration methods for the scale.
Explains scale displays for overload, low battery, zero errors, and instability.
Configures transmission methods like stable output, on-enter output, or continuous output.
Allows selection of baud rates from 1200 to 9600 for serial communication.
Describes the standard RS232 UART signal frame structure with start, data, and stop bits.
Details the 6-byte message structure including flags, mode, weight, and units (lb/Kg).
To Next Page
General